Chemical protection
Vitex full protection suit
EN 943-2:2019 · Type 1a-ET
- Breathing apparatus worn inside the suit
- 4 exhaust valves for pressure regulation
- Permanently antistatic to EN 1149-5
Green
Catalogue
Products
Certified protective suits for chemical, heat, cold and blasting protection. Filter by hazard, standard, approval or sector.
Chemical protection
Full protection suit Type 1c
EN 943-2:2019 · Type 1c
- Breathing air via a separate air line at the head section
- Integrated control valve, noise reducer and waist belt
- Large panoramic visor
Blue
Image to follow
Chemical protection
Vitex training suit
- Weight, fit and freedom of movement like the operational suit
- Durable, easy to clean, made for repeated use
- Optional printing or colour coding
Chemical protection
Chemprotector® Divetex®
EN 943-1:2015+A1:2019 · Type 1b-ETDNVSOLAS
- For all full-face masks to EN 136 cl. 2/3
- Attached chemical protective boots
- Butyl gloves, antistatic coating
Red, Fluorescent yellow
Chemical protection
Chemprotector® Mega-Divetex®
EN 943-2:2019 · Type 1b-ET
- Mega-Divetex® material, permanently antistatic
- With exhaust valve
- Attached boots to EN 15090
Green
Chemical protection
Divetex® chemical protection overall
EN 14605:2005+A1:2009 · Type 3
- Wearable with helmet and/or respirator
- Front or back zip
- Permanently antistatic on both sides
Green, Yellow, Blue
Chemical protection
Divetex® overall (olive/red)
EN 14605
- Crinkle hood for helmet and mask
- Front or back zip
- In olive or red
Olive, Red
Chemical protection
Divetex® two-piece protective suit
EN 14605:2005+A1:2009
- Hooded jacket, trousers with braces
- Permanently antistatic on both sides
- Very comfortable to wear
Green, Blue, Red
Chemical protection
Divetex® sleeve apron
EN 14605:2005+A1:2009
- Adjustable in length and width
- 2 exhalation valves
- Optional hood with large visor
Green, Blue, Red
Chemical protection
Mega-Divetex® / Divetex® chemical protection hood
EN 14605:2005+A1:2009
- Protects head and shoulders
- Large polycarbonate visor
- Two outlet valves
Green (Mega-Divetex®), Blue (Divetex®), Red (Divetex®)
Image to follow
Chemical protection
Divetex® canal waders
- Welded boots with steel toe cap and steel midsole
- Seams welded watertight and chemical-tight
- Cold-resistant down to −40 °C
Olive
Chemical protection
CSA storage bag
- 225 × 70 cm for horizontal storage
- Two-way zip
- Optional document pocket
White / transparent
Heat & flame protection
Seaprotector I
ISO 15538 · Level 2MEDSOLASDNV
- Gold-coated visor, replaceable
- Breathing apparatus under the suit
- With gloves, boots, helmet and bag
Aluminised
Heat & flame protection
Seaprotector II
ISO 15538 · Level 2MEDSOLAS
- For firefighting at sea and offshore
- Jacket with high stand-up collar
- MED Module B + D, ISO 15538 Level II
Aluminised
Heat & flame protection
Seaprotector III
EN 469:2020 · X2 Y2 Z2MEDSOLAS
- Four-layer construction with PTFE membrane
- MED/3.3a – successor to the deleted item 3.3c
- Reflective trim on jacket, sleeves and trousers
Navy blue (standard), Khaki, Orange
Heat & flame protection
Heat protection suit for foundries & steelworks
ISO 15538:2001 · Level 2
- Protection against radiant heat and metal splashes
- EN 397 helmet with gold-coated visor, protection level 4–5
- Breathable inner lining for long shifts
Aluminised
Heat & flame protection
Heat protection hood
EN ISO 11612
- Protects head, chest and shoulders
- Large gold-coated visor, 22 × 10 cm
- Only about 0.7 kg
Aluminised
Water, cold & survival
Divetex® work & survival suit
MEDSOLAS
- Worn without life jacket: 5 mm buoyancy built in
- Keeps an unconscious wearer face-up
- Waterproof, water column over 6 m
Fluorescent yellow
Water, cold & survival
Immersion suit SOLAS / MED
SOLASMED
- Neoprene, waterproof zip
- 5 mm three-finger neoprene gloves
- Worn with an approved lifejacket
Yellow
Blasting
Sandblasting suit
EN ISO 14877:2002 · Type 3
- Inner and outer suit in two materials
- Compressed-air supply via the helmet
- Belt with pressure control valve
Olive
Blasting
Sandblasting suit “BLASTER” Type 1
EN ISO 14877:2002 · Type 1
- Neck closure with stand-up collar (Type 1)
- Inner and outer suit in two materials
- Integrated knee reinforcement
Green
Image to follow
Blasting
Wet-blasting suit Avilastic
- Polyester fabric, PU-coated on one side
- Conical latex cuffs, neck ruff
- Hot-air welded on the outside
Orange
No products match this selection.